Skip to main content
FREE Delivery!|(516) 914-4265

Rockland County, New York ยท Free Delivery

Stone Dust for Patios in Congers, NY

Free delivery to Congers on every order, with loads arriving in as fast as 2 business days.

Delivering to Congers, NY

Free delivery on every order.

  • Free delivery to Congers
  • Order from 1 ton
  • As fast as 2 business days

Gravel delivered to Congers

Crushed gravel and base materials that compact under tires.

Item 4

3/4" minus blend compacted under roads and heavy-load areas

From 1 Ton Delivered, FREE to your Doorstep

Cost per ton lowers the more you order!

Free delivery to Congers

Rock & Stone delivered to Congers

Graded crushed stone for drainage, concrete and heavy work.

RipRap

4" to 12"+ rock for shorelines, slopes and culvert outlets

From 1 Ton Delivered, FREE to your Doorstep

Cost per ton lowers the more you order!

Free delivery to Congers

Decorative delivered to Congers

Rounded stone for beds, borders and water features.

Sand delivered to Congers

Washed sand for masonry, concrete and leveling.

Soil, Fill & Mulch delivered to Congers

Soil and fill by the ton, mulch by the cubic yard.

How delivery to Congers works

  1. 1

    Pick the material and quantity.Open a product to see your price, with free delivery to Congers.

  2. 2

    Choose a delivery date at checkout.As fast as 2 business days for most Congers addresses.

  3. 3

    Clear a drop spot.The truck tips the load where you mark it. Note low wires or branches when you order.

Not sure how much you need?

Enter length, width and depth and the calculator returns the cubic yards and tons for your project.

Open the calculator

Gravel and aggregate delivery in Congers, NY runs from spring thaw into late fall. Frozen ground stops compaction in winter, and wet clay valley ground can stay soft into spring. New York Rock Supply stocks item 4, stone dust and the other bulk materials your project needs. Time your order around the season and the load lands when you can actually work it.

Ground and Conditions in Congers

A patio base that is too thin shows itself fast here. The pavers rock, joints open, and the edges sink after a wet spring. Stony glacial till covers the hills and highlands around Congers, and ledge rock is often close to the surface. On the valley floors, silt and clay left by old glacial lakes drain slowly and stay wet after storms.

That ground moves when it freezes and thaws. Silt and clay soils are especially prone to frost heave, and cold winters bring repeated cycles of it. Footings usually go about 4 feet down, and the local building department sets the exact depth.

The fix is a base that is thick enough and drains. A compacted layer of item 4 under the bedding spreads the load and keeps water from pooling under the pavers. Skip it and you rebuild the patio next season.

Materials for Congers Projects

Bedding is where most patio jobs are won. Stone dust, also called screenings or stone screenings, is the usual New York choice under pavers and flagstone. It compacts to a firm, flat surface that holds a screed line, and it locks the joints once you sweep it in. For a patio, a walkway or a shed base, Stone Dust is the material to plan around.

Under the bedding goes the structural layer. Item 4 is the standard New York name for compacting subbase stone, and it carries driveways, parking pads and patio bases. It binds as it compacts and stays put. Many New York yards sell crusher run and item 4 as the same kind of material, and Crusher Run does the same job.

Flatwork that meets a wall or a step calls for sand. Mason Sand handles brick and block work, paver joints and play sand. For leveling and bedding under slabs, Washed Sand is the concrete sand most crews ask for.

Drainage around a patio matters as much as the base. Drain Rock fills French drains, drywells, foundation drains and downspout runs. #57 Stone works for drainage and concrete aggregate, and some New York yards sell this size range as a #1 and #2 blend. Where a slope or a bank needs armoring against runoff, RipRap holds the soil in place.

Delivery to Congers and the Surrounding Area

You order online and choose your quantity by the ton or by the yard. If you are not sure which one fits, the calculator on the product page sizes the load from your project dimensions. Pick a delivery date at checkout and a dump truck brings the material to your site.

Congers sits in Rockland County, and deliveries reach New City, Spring Valley, Monsey, Nanuet and Pearl River as well. Have the drop spot clear before the truck arrives. Bulk stone and sand go on a driveway, a pad or bare ground, not on a finished surface.

Questions About Gravel and Stone in Congers

What gravel is best for a driveway in Congers?

Start with item 4 as the compacted base, then top it with Driveway Gravel. Item 4 binds and carries the load, which matters on the clay and silt valley ground here. The surface layer gives you the look and the traction you want. On a slope, plan drainage before you order.

How much material will my project need?

Measure the area and the depth you plan to build, then enter those numbers in the calculator on the product page. It converts your dimensions into the quantity you order, in tons or yards. Order the base and the bedding as separate loads so each layer gets the right material.

Size Your Load and Place Your Order

Figure your square footage and your depth, then let the calculator turn that into tons or yards. Order item 4 for the base, stone dust for the bedding, and sand or drainage stone if the job calls for it. Choose your delivery date at checkout and New York Rock Supply brings the load to your site in Congers.

Frequently Asked Questions

Common questions about gravel and aggregate delivery in Congers, NY

What gravel is best for a driveway in Congers?

Start with item 4 as the compacted base, then top it with Driveway Gravel. Item 4 binds and carries the load, which matters on the clay and silt valley ground here. The surface layer gives you the look and the traction you want. On a slope, plan drainage before you order.

How much material will my project need?

Measure the area and the depth you plan to build, then enter those numbers in the calculator on the product page. It converts your dimensions into the quantity you order, in tons or yards. Order the base and the bedding as separate loads so each layer gets the right material.

How is the material measured?

You can order by the ton or by the cubic yard, whichever suits how you plan the job. If you tell us the area you are covering and the depth you want, we will work the quantity out with you rather than leaving you to guess.